Quality Alum-A-Vator HS
High Speed
Alum-A-Vator HS is a high speed lift. It lifts at twice the speed of the Alum-A-Vator II, a convenience demanded by many customers. It further features our zero maintenance package and requires no lubrication.
- Cables connected to four corners of boat platform
- Two motor driven shafts supported from beams running parallel to the center line of the boat
- Typically mounted on four pilings
- Used in tidal waters, the Great Lakes and reservoirs, where water levels vary.
Alum-A-Vator II and Alum-A-Vator HS are available for boats weighing from 4,500 through 54,000 lbs.
Specifications
| Model | Capacity | Electrical
Requirements (per motor) |
Motors | Lift Speed | Bottom Beam* |
#
of Pilings and Size |
Piling Spacing (on center) | |
| Fore and Aft | Port
to Starboard |
|||||||
| Alum-A-Vator HS | 4,500 |
120v-16.6amps |
(2) 1.5HP | 80"/min | 6"x4" | (4) 8" Dia. | 132" | 120" |
| Alum-A-Vator HS | 7,000 | 120v-16.6amps | (2) 1.5HP | 64"/min | 6"x4" | (4) 8" Dia. | 144" | 144" |
| Alum-A-Vator HS | 10,000 | 120v-16.6amps | (2) 1.5HP | 40"/min | 8"x5" | (4) 8" Dia. | 144" | 150" |
| Alum-A-Vator HS | 13,000 | 120v-16.6amps | (2) 1.5HP | 32"/min | 8"x5" | (4) 8" Dia. | 144" | 150" |
| Alum-A-Vator HS | 16,000 | 120v-18.4amps | (2) 2.0HP | 52"/min | 10"x6" | (4) 10 " Dia. | 144" | 168" |
| Alum-A-Vator HS | 20,000 | 120v-18.4amps | (2) 2.0HP | 34"/min | 10"x6" | (4) 10 " Dia. | 168" | 192" |
| Alum-A-Vator HS | 27,000 | 120v-18.4amps | (2) 2.0HP | 28"/min | 10"x6" | (4) 10 " Dia. | 192" | 192" |
| Alum-A-Vator HS | 32,000 | 120v-18.4amps | (2) 2.0HP | 44"/min | 10"x6" | (8) 10 " Dia. | 72"-144"-72" | 216" |
| Alum-A-Vator HS | 40,000 | 120v-18.4amps | (2) 2.0HP | 32"/min | 10"x6" | (8) 10 " Dia. | 72"-144"-72" | 216" |
| Alum-A-Vator HS | 54,000 | 120v-18.4amps | (2) 2.0HP | 26"/min | 12"x7" | (8) 10 " Dia. | 72"-144"-72" | 240" |
