Quality Alum-A-Vator II
Alum-A-Vator II is a superbly engineered gear drive boat lift. Its design incorporates a chain in the final power connection to the cable winder shaft. Stronger than gear teeth, and situated between the gear box and the shaft, it absorbs the high torque loads experienced during lifting. It features a fully enclosed drive system to ensure extended product life, even in extreme salt water conditions.
- Cables connected to four corners of boat platform
- Two motor driven shafts supported from beams running parallel to the center line of the boat
- Typically mounted on four pilings
- Used in tidal waters, the Great Lakes & reservoirs, where water levels vary.
The housing is large enough to prevent wind blown rain and salt spray from reaching mechanical and electrical components. Solar power is optional on the Alum-A-Vator II. This 12-volt system give some customers peace of mind. It often reduces installation costs, and in some situations, where shore power is not available, it may be the only option.
Specifications
| Model | Capacity | Electrical
Requirements (per motor) |
Motors | Lift Speed | Bottom Beam* |
#
of Pilings and Size |
Piling Spacing
(on center) |
|
| Fore and Aft | Port
to Starboard |
|||||||
| Alum-A-Vator II | 4,500 | 120v-11.4amps | (2) 3/4HP | 40"/min | 6"x4" | (4) 8" Dia. | 132" | 120" |
| Alum-A-Vator II | 7,000 | 120v-11.4amps | (2) 3/4HP | 32"/min | 6"x4" | (4) 8" Dia. | 144" | 144" |
| Alum-A-Vator II | 10,000 | 120v-11.4amps | (2) 3/4HP | 20"/min | 8"x5" | (4) 8" Dia. | 144" | 150" |
| Alum-A-Vator II | 13,000 | 120v-11.4amps | (2) 3/4HP | 16"/min | 8"x5" | (4) 8" Dia. | 144" | 150" |
| Alum-A-Vator II | 16,000 | 120v-14.0amps | (2) 1.0HP | 26"/min | 10"x6" | (4) 10 " Dia. | 144" | 168" |
| Alum-A-Vator II | 20,000 | 120v-14.0amps | (2) 1.0HP | 17"/min | 10"x6" | (4) 10 " Dia. | 168" | 192" |
| Alum-A-Vator II | 27,000 | 120v-14.0amps | (2) 1.0HP | 14"/min | 10"x6" | (4) 10 " Dia. | 192" | 192" |
| Alum-A-Vator II | 32,000 | 120v-14.0amps | (2) 1.0HP | 22"/min | 10"x6" | (8) 10 " Dia. | 72"-144"-72" | 216" |
| Alum-A-Vator II | 40,000 | 120v-14.0amps | (2) 1.0HP | 16"/min | 10"x6" | (8) 10 " Dia. | 72"-144"-72" | 216" |
| Alum-A-Vator II | 54,000 | 120v-14.0amps | (2) 1.0HP | 13"/min | 12"x7" | (8) 10 " Dia. | 72"-144"-72" | 240" |
